ferepremium.blogg.se

Download ultracopier for windows 8
Download ultracopier for windows 8







It seems that copying large individual files works best using Windows 7’s copying ability, at least if speed is what counts. I did like the steady transfer speeds, though, so this might be noteworthy if you’re paranoid about backups. However, copying from B to C took 4:01, significantly longer than either TeraCopy or Windows.Ģ4 Gb of smaller files took the longest, at about 19:20 from A to B and 18:53 from B to C. Copying 4.4 GB from A to B took 3:21, beating out TeraCopy for second-place. It never dipped too low, even towards the end of the longer copying process, and stayed between 22 MB/s and 18 MB/s. While using SuperCopier, I immediately noticed the sustained transfer speeds. It was like a roller coaster, going anywhere from as high as 31 MB/s down to 12 MB/s. The rate would drop sharply at times to half, then shoot up for a brief time only to even out a bit.

download ultracopier for windows 8

The transfer speeds fluctuated quite a bit compared to Windows 7’s copying mechanism. While copying 24 GB of smaller files, however, TeraCopy undercut Windows with 17:32 from A to B and 17:02 from B to C. Copying the 4.4 GB file took longer than Windows did, at 3:41 from A to B and 2:53 from B to C. Testing TeraCopy yielded some interesting results.

download ultracopier for windows 8

In numbers, this was roughly 26 MB/s down to about 17 MB/s. The one thing that seemed pretty consistent was that as the transfer pushed forward, the rate of transfer would drop over time, ending at about 2/3 of what it initially was at. When copying 24 GB of my music collection, the process took 18:21 from A to B, and 18:09 from B to C.

download ultracopier for windows 8

Windows 7 seems to prove itself with large files. Copying a single 4.4 GB file from A to B took only 3:13 and copying from B to C took 2:42. The default Windows 7 copier proved to be pretty snappy. I did my best for you readers, and ultimately it came down to the copying programs themselves. This minimized the influence of pre-caching before hitting the Start button on each. I also configured TeraCopy and SuperCopier to be the default copiers, and I clocked from the time I hit Ctrl+V. A clean reboot ensured near-optimal performance for each task. Copying the files in order the same way each time discounted any advantage one program would have had over another by way of caching. External A was a 2 TB internal drive in an enclosure, and external C was a 750 GB store-bought drive. All of the drives I ran this test on were 7200 RPM hard drives and had a cache of 8 MB. Why did I decide to do that? Well, there are quite a few factors to this test, including hard drive speeds.









Download ultracopier for windows 8